SENTINEL 2000 SERIES Vent Pipe Cover
 Frame:
Fabricated from strong 6mm thick steel, galvanised after manufacture to BS EN
ISO 1461:1999.
Moated/Internal Flanges: For optimum security and prevention of unauthorised
removal or interference when cover is closed and locked. Supplied with large
holes for further drainage and internal lip preventing ingress of contaminants.
Lid Stops: Prevents over compression or shearing of the seal.
Air Vents: Push-in replaceable vents give optimum ventilation to chamber whilst
allowing any contaminants or excess fluid to drain to the outside of the cover
and away from the chamber.
Staple: Fully adjustable for clamping pressure and for use with different
padlocks for optimum security.
Hinges: Totally concealed with added protection from vent boxes.
Dog Leg: For increased security around hinge area.
Lid: Removable lid, fabricated from strong 4mm thick steel for additional
strength and security. Galvanised after manufacture to BS EN ISO 1461:1999.
Protective Peak: Affords further protection to the locking mechanism.
Seal: WRc approved material fitted to the underside of the lid guards against
accidental damage.
Lifting Handles: Fitted to front.
Secondary Lid: Provides an additional barrier against contamination whilst
allowing free air flow into the chamber.
|
